DAVIS SONIC-ANEMO-DZP Скачать руководство пользователя страница 5

SONIC-ANEMO-DZP 

© LCJ Capteurs 2016 – All rights reserved. 

Page 1 

1. General information

1.

About this manual

This manual brings all the required information to install and use the SONIC-ANEMO-DZP for Davis VP2. 
Read all the information contained in this manual carefully before using the sensor, as misuse can 
cause damage to the product.  

2.

Warnings

Important points are highlighted in this document as follow: 

Warning!  Serious hazard. Read carefully and follow the instructions. High risk of injury or even 
death.  

Warning: Potential hazardous situation. Read carefully and follow the instructions to avoid damages 
on the product or loss of important data. 

Note: Important information regarding use of the product. 

3.

Your experience

LCJ CAPTEURS values your feedback and suggestions to improve the manual. Should you find any mistake, 
please contact us indicating the chapter, section and page to correct. You can find our details on the manual's 
cover page and on our website:  

www.lcjcapteurs.com

4.

Safety

When using the product, safety measures described below must be followed to avoid damage and legal 
responsibility. Follow all safety and use instructions regarding the product. Follow all warning notices indicated 
in the product's use instructions. The following instructions are meant to reduce all risk of personal injuries, 
electric shock, fire and damage of the equipment. 

Read carefully and follow all instructions contained in this manual to avoid measures errors caused by misuse. 

Warning!  Follow all safety measures applicable for the product's installation. 

Electric safety measures 

This product has been designed to be powered by a battery or a specific power supply. Any other power 
supply can be hazardous and will result in the product's unconformity.  

Handle the battery with care.

This product contains a Lithium-ion iron phosphate battery (LiFePO4). There is a risk of fire if the
battery is not correctly handled. Do not attempt to open or repair the battery. Do not dismount the

battery, do not press on it, do not drill in it, do not place it in a short-circuit situation, do not threw it in fire or 
water and do not expose it to temperatures over 60

°

C (140

°

F). Use only original LiFePO4 batteries with 

original connectors. 

Air transport.

When the product is transported by plane, it must be disconnected. Refer to IATA recommendations.

Содержание SONIC-ANEMO-DZP













Отзывы: