Locating the ISS and Anemometer
15
4. Separate an end cap from one end of the magnet.
Separate magnet from one end cap
Insert magnet with other end cap into metric measurement adapter
5. Slide the magnet, exposed end of the magnet first, into the open slot of the metric
adapter.
6. Insert the metric adapter and magnet between the arms of the bucket, with solid side of
the metric adapter facing up.
Open plastic arms to insert metric measurement adapter,
with adapter in “V” position
Note:
The above procedure converts the collector to 0.2 mm measurements. The console must be set
accordingly. See the
Vantage Pro2 Console Manual
for more information.
Locating the ISS and Anemometer
For the weather station to perform at its best, use these guidelines to select the best
mounting locations for the ISS and anemometer. Be sure to take into consideration ease
of access for maintenance, sensor cable lengths and wireless transmission range when
siting the station.
Note:
When selecting a location for installing your ISS, especially on a rooftop, make sure it is a location
far from power lines and electrical wiring.
General ISS Siting Guidelines
•
Place the ISS at least 6' (2 m) away from sources of heat such as chimneys and
exhaust vents.