DAVIS TECHNOLOGIES TMS-9500-SL Short Скачать руководство пользователя страница 32

32 

Davis Technologies TMS-9500-SL Short 

www.moretraction.com 

with  the  Product  or  other  information  provided  by  Davis  in 
writing  and  which  specifically  references  the  Product. 
Purchaser and/or end user may not rely on any oral information 
or statements provided by Davis or in any forum or other source 
of information regarding the Products. It is the Purchaser and/or 

end user’s responsibility to inspect and verify the dimensions, 

specifications,  and  performance  of  the  Products  as  being 
appropriate for the use to which the user will put them prior to 
any  actual  installation  and/or  use.  The  Products  are  to  be 
inspected by the Purchaser and/or end user before each use for 
evidence  of  damage,  defect  or  wear.  The  installation  of  the 
Products may adversely affect other vehicle components, safety 
equipment or manufactured goods (collectively "goods"). Davis 
assumes  no  responsibility  for  any  damage  to  other  goods,  or 
bodily injury that may arise due to failure of other goods, due to 
installation  and/or  use,  either  proper  or  improper,  of  its 
Products. 

Davis agrees to inspect any Product up to sixty days after the 
date  of  original  purchase  from  Davis  and  may,  at  its  sole 
discretion,  replace  any  Product  that  it  determines  does  not 
comply  with  specifications.  Shipping  to  and  from  Davis  is  at 

Purchaser’s  sole  expense.  Otherwise,  the

  PRODUCTS 

(INCLUDING  PARTS  RESOLD  BY  DAVIS)  ARE  SOLD  "AS  IS" 
WITHOUT 

ANY 

WARRANTY, 

WRITTEN 

OR 

ORAL, 

WHATSOEVER. 

EXPRESS 

WARRANTIES, 

IMPLIED 

WARRANTIES,  WARRANTIES  OF  MERCHANTABILITY  AND 
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE ARE 
EXCLUDED. 

THE 

ENTIRE 

RISK 

OF 

QUALITY 

AND 

PERFORMANCE  OF  THE  PRODUCTS  IS  WITH  THE  BUYER, 
USER,  SUBSEQUENT  USER,  OR  AGENT  THEREOF  (HEREIN 
"USER").  SHOULD  THE  PRODUCTS  PROVE  DEFECTIVE 
FOLLOWING THEIR PURCHASE, THE BUYER AND NOT DAVIS, 
ANY DISTRIBUTOR(S), OR RETAILER(S), ASSUME THE ENTIRE 
COST OF ALL NECESSARY SERVICES OR REPAIR AS RESULT 
OF A PRODUCT FAILING. 

DAVIS DISCLAIMS ALL LIABILITY FOR ANY SPECIAL, DIRECT, 
INCIDENTAL  OR  CONSEQUENTIAL  DAMAGES,  OR  ANY 
DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, 
THE  LOSS  OF  LIFE  OR  LIMB,  OR  DAMAGES  DUE  TO  BODILY 
OR PERSONAL INJURY, WHICH MAY ARISE OR RESULT FROM 
THE SALE, INSTALLATION, OR USE OF  THE PRODUCTS.  

Содержание TMS-9500-SL Short





































Отзывы: