Davis Instruments GroWeather, Руководство пользователя

Страница: 45 / 65

Using the GroWeather
Page 38 GroWeather Manual
4. To view the date on which the barometric pressure was stored, wait four seconds
without pressing a key.
The date on which the barometric pressure was stored will automatically
appear on the right of the display. As long as you do not press a key, the
GroWeather will continue to alternate between the stored value, the time,
and the date.
5. To store a new barometric pressure, see “Storing Barometric Pressure” on page 38.
Storing Barometric Pressure
To store a barometric pressure, simply clear the previously stored barometric
pressure. The current barometric pressure is automatically stored as the new
value.
1. Press BAR as necessary to display current barometric pressure.
2. Press RECALL to display the stored barometric pressure.
3. Press and hold down CLEAR.
The stored barometric pressure value begins to flash as a warning.
4. Hold CLEAR until the current barometric pressure replaces the stored barometric
pressure value on the display and the value stops flashing.
When the value stops flashing, the current pressure has been stored.
Alarms
You may set a special barometric pressure alarm which will alert you to
changes in the barometric pressure. (See “Setting the Barometric Pressure
Alarm” on page 49.)
R
ELATIVE
H
UMIDITY
The GroWeather displays the current relative humidity. In addition, you may
view the high and low relative humidity along with the time and date at which
they occurred.
Viewing Humidity
1. To display the current relative humidity, press HUM.
The current relative humidity appears on the right of the display.
C
URRENT
R
ELATIVE
H
UMIDITY