Page 2
EZ-Mount Advanced Station
C
OMPONENTS
The EZ-Mount Advanced Weather Station includes the following compo-
nents. Please make sure you have everything you need before beginning.
Extension
Tube
Wind Cups
Anemometer
This hardware
comes installed
on Sensor Array:
#8 x 1-1/2"
Pan HeadScrew
#8 Lock Washer
#8 Hex Nut
Sensor Array
100' (30 m) 8-Conductor Cable, Standard
(Industrial Not Shown)
5/16"
Hex Nut
5/16" x 2"
Carriage Bolt
Brace Clamp
Rain
Collector
Cone
EZ-Sensor Arm
Additional Components for INDUSTRIAL Installations Only
ICAM Kit
8-Conductor Cable,
Standard,
for ICAM to Console,
25' (7.5m)
16.5' (5m)
Ground Wire
#6x1"
(25mm)
Screws
Cable
Ties
Adhesive
Pads
Power Adapter
Weather Station Console
#8 x 3/4"
Pan Head Screws
(for mounting Console
on wall)
Debris Screen
(place inside
Rain Collector Cone
after installation)
#6 x 1/4"
Pan Head Screws
(for mounting Console
on Field Case door)
1-1/8"
Saddles
5/16" Flat Washers
5/16" x 1-1/2"
U-Bolt
5/16" Lock Washers
5/16" Hex Nuts
5/16" x 3"
Lag Screws
Cable
Tie
Allen
Wrench
5/16"
Flat Washers
Interface
Cable
Adapter
Module
(ICAM)
16.5' (5m) Ground Wire(s)
(Not Shown)
