Davey SpaPOWER SP400P, Руководство пользователя

Страница: 9 / 12

9
7. SLEEP TIMER (Optional Timeclock)
If the optional time clock has been fitted, sleep mode is used to
disable automatic temperature maintenance and filtration in order
to silence the spa pool during your hours of sleep.The sleep time
setting is done using the digital time clock on the front of the control
box (See below for setting instructions). If the spa is in use it will not
enter sleep mode until 30 minutes after the last manual button push,
even if the clock is calling for sleep mode. The spa can still be used
manually within sleep mode times as normal. On wake up from sleep
the system will run the blower for 15 seconds to purge the blower
plumbing. This prevents any stagnant water from collecting in the
pipes if the pool is not used for an extended period.
7.1 To Set Current Time and Day
1. Press the RESET button before use. NOTE:This is optional. It will clear the current time
and program settings.
2. Hold down the CLOCK button and press the DAY button until the correct day is selected.
Release both buttons.
3. Hold down the CLOCK button and press the HOUR button until the correct hour is set.
Release both buttons.
4. Hold down the CLOCK button and press the MIN button until the correct minute is set.
Release both buttons.
5. After setting the weekday and time,the seconds will reset automatically and the clock will
begin keeping time.
7.2 To Set Programs
1. Press the TIMER button. “1ON” will appear at the left side of the display. This is the start time of the first
programmed sleep block (the time you want the spa to enter the sleep mode).
2. Press the DAY button to select the days on which this sleep program will operate.There are15 settings to
choose from.
3. Press the HOUR button to set the hour of the desired time to enter sleep mode.
4. Press the MIN button to set the minutes of the desired time to enter sleep mode.
5. Now the start time has been set, press the TIMER button again. “1OFF” will appear on the display.This is
the end time of the first programmed sleep block (the time you want the spa to resume normal operation).
6. Repeat the same procedure (2 to 4 above) until the “1OFF” time is set. (Becareful to set the same days
as used in the “1ON” time).
7. Your timer gives you upto 8 different programmable periods.You can use all 8 settings,or as few as you like.
8. To Review your set programs press the
TIMER button and keep pressing it to advancet hrough each
setting.
IMPORTANT NOTE:
The “MANUAL” button on the clock can be used to override the programmed sleep settings.
It is very important to ensure that the clock is set to “AUTO” so that the programmed times can operate. If the
clock is manually set to ON then the pool will stay in sleep mode and THE WATER WILLGO COLD. If it is left in
“OFF” then the pool will not enter the sleep mode. The clock does not return to “AUTO” byitself.
NOTE: If the “MANUAL” button on the clock is used the spa will not return to the programmed settings until
the next programmed time after being returned to Auto.