background image

2

Congratulations on the purchase of a quality product from the Davey Water 
Products range of Pool and Spa Equipment. You are assured of many years 
of reliable and super-efficient performance from your Davey ProMaster

TM

 

VSD Eco-Series pump.

Read these instructions in their entirety before switching on this pump. If 
you are uncertain as to any of these installation and operating instructions 
please contact your Davey dealer or the appropriate Davey office as listed 
on the back of this document.

The Davey ProMaster

TM

 has been designed to circulate swimming pool and 

spa water in conditions set out in the Australian Standard for swimming pool 
water quality AS 3633 or equivalent. They should not be used for any other 
purpose without first consulting your Davey Dealer or the Davey Customer 
Service Centre.

Every Davey ProMaster

TM

 is thoroughly water tested against a number of 

flow, pressure, voltage, current and mechanical performance parameters. 
Davey`s advanced pump manufacturing technology provides reliable and 
efficient pumping performance that lasts and lasts.

Saving Energy with your Davey ProMaster

TM

  

VSD Eco-Series Pump:

The Davey ProMaster

TM

 Pool & Spa pump is a super efficient pump utilising 

a very clever, state of the art infinitaly variable AC motor that provides lower 
levels of noise, lower operating costs and lower greenhouse emissions than 
traditional pool pumps.

Due to its ability to run at lower speeds than conventional pumps, your 
ProMaster

TM

 pump will also experience less mechanical wear and tear due 

to less stress on the internal mechanical components.  

To achieve energy efficient pumping is easy. Simply run the filtration 
pump at a lower speed, but run it for longer (see table on page 8) than 
a conventional fixed speed pump to “turn over” your pool water for 
adequate filtration and sanitisation. The result is lower energy use and up 
to 70% lower operational costs. 

Содержание PM200SV

















Отзывы: