2
Prior to using this pump you must ensure that:
• The pump is installed in a safe and dry environment
• The pump enclosure has adequate drainage in the event of leakage
• Any transport plugs are removed
• The pipe-work is correctly sealed and supported
• The pump is primed correctly
• The power supply is correctly connected
• All steps have been taken for safe operation
Appropriate details for all of these items are contained in the following Installation
and Operating Instructions. Read these in their entirety before switching on this
pump. If you are uncertain as to any of these Installation and Operating Instructions
please contact your Davey dealer or the appropriate Davey office as listed on the
back of this document.
Congratulations on your purchase of a high quality, Australian built Davey pressure
pump. All components have been designed and manufactured to give trouble free,
reliable operation.
Before installing your new pump, please read all instructions carefully as failures caused
by incorrect installation or operation are not covered by the guarantee. Your Dynajet®
XJ pump is designed to handle clean water. It should not be used for any other purpose
without specific referral to Davey. The use of the pump to handle flammable, corrosive
and other materials of a hazardous nature is specifically excluded.
XJ50P / E2P / E3P
1. Pressure tank
(supplied separately)
2. Pressure switch
3. Delivery outlet (1”F)
4. Suction inlet
(X50P = 1”F)
(E2P & E3P = 1
1
/
4
”F)
5. Pump body
6. Motor
XJ50 / XJ70 / XJ90
Are the same as above
less items 1 & 2.
Note:
Your XJ Ultra, E2P
& E3P pump is designed
to operate as an automatic
pressure system when
used in conjunction with a
pressure tank such as a
Davey “Supercell 18” tank
(illustrated). The tank,
supplied separately, needs to
be fitted to the delivery outlet
prior to operating.
Assembly
Attach pressure switch (2)
to the delivery outlet tee
(3) by hand tightening the
pressure switch union nut
(ensure sealing oring is in
place). Screw pressure tank
(1) onto delivery outlet.
Do not use this pump to pump flammable fluids, such as petrol
or diesel fuels.
Choosing a Site
Choose a site with a firm base and as close to the
water source as possible with correct power supply.
Make sure your pressure system is always connected
to an adequate, reliable source of clean water.
