Dave Smith Instruments Temptest Скачать руководство пользователя страница 75

Страница: 75 / 100

Tempest Operation Manual

Save/Load

To Export from one Tempest (master) to Another (slave) over MIDI:

1. Connect MIDI out on the master to MIDI in on the slave. (Tempest is

incapable of acting as a USB host, so transfers must be done using a MIDI

cable.)

• If exporting a Sound from RAM, put both Tempests into

16 S

oundS

mode,

tap a pad on the master to select the source Sound, and tap a pad on the

slave to choose the destination.

• If exporting a Beat from RAM, put both Tempests into

16 B

eatS

mode, tap

a pad on the master to select the source Beat, and tap a pad on the slave to

choose the destination.

• If exporting a Project from RAM, put both Tempests into

16 B

eatS

mode.

Since there is only one Project in RAM at a time, there is no source or

destination to select.

2. On the master, press

ave

oad

and choose Export Sound/Beat/Project in

RAM over MIDI or Export Saved File over MIDI (Sound/Beat/Project)

to transfer the data. The slave does not need to be enabled to receive the

transfer. Just press

XPoRt

when ready. Exports from RAM load into

the slave’s RAM; exports from flash load into the slave’s flash.

3. Press the

gain

Soft Key to export another file or

ave

oad

to exit.

To Export Tempest’s entire file contents for backup (Beats, Projects, Sounds):

1. Connect Tempest to the receiving device (computer running MIDI applica-

tion, etc.) using either USB or a MIDI interface. If using a MIDI interface,

connecting Tempest’s MIDI out to the device’s MIDI in is sufficient for

exporting.

2. Press the

Save

load

button.

3. Use Soft Knob 1 to select item 8, “

eXPoRt

file

oveR

midi

.”

4. Press the

Soft Key.

5. Use Soft Knob 4 to select “

all

.”

6. Press the

Soft Key again.

7. Use Soft Knob 3 to select the appropriate MIDI port (

midi

uSB

)

8. Press the

eXPoRt

now

Soft Key.

Содержание Temptest





































































































Результаты поиска

Содержание Temptest

Отзывы:

Dave Smith Instruments Temptest, Руководство по эксплуатации, Страница: 75 / 100

Результаты поиска

Содержание Temptest

Отзывы: