manualshive.com logo in svg

Dave Smith Instruments Prophet Rev2, Руководство пользователя

Поделиться
Скачать
Dave Smith Instruments Prophet Rev2 Скачать руководство пользователя страница 50

40

Arpeggiator

Dave Smith Instruments

To use the arpeggiator:

1.  Press the arpeggiator

 

on

/

off

 

switch to turn it on. 

2.  Hold down one or more notes on the keyboard. The arpeggiator plays 

them according to the settings you’ve chosen. 

3.  To latch arpeggiation on (so that you don’t have to continuously hold 

down notes) press the 

hold

 button.

4.  Adjust settings such as

 

mode

, 

octave

, 

repeats

, and 

bpm

.

5.  To synchronize a delay effect to the arpeggiator, turn on 

clk

 

sync

 in the 

effects

 section, choose a delay, and adjust its delay time

 

setting as desired.

 An audio signal connected to the rear-panel 

sequence

 jack can be used to control 

arpeggiator (and sequencer) playback. This makes it possible to tempo sync the arpeg-
giator to a recorded drum track or other audio source. Audio signals used to drive the 
arpeggiator/sequencer should not exceed 5 volts peak-to-peak. See “Seq Pedal 
Mode” on page 17 for more information about choosing the appropriate mode for 
these behaviors.  

Arpeggiator Parameters

On/Off

—

This button turns the arpeggiator on and off.

Mode:

 

Pressing this button shows various arpeggiator options in the 

OLED display. You can scroll through these and choose their settings 
with the 

parameter

 and 

value

 knobs.

Arp Mode: 

Sets the order in which notes play when the arpeggiator is on. See 

the table.

Arp Mode

Behavior

Up

Plays from lowest to highest note

Down

Plays from highest to lowest note

Up + Down

Plays from lowest to highest and back to lowest

Random

Plays notes in random order

Assign

Plays notes in the order the keys were pressed

Arp Range:

 1, 2, 3 —

Set to 1, only the held notes are arpeggiated. Set to 

2, the held notes and the notes one octave above them arpeggiate. Set to 
3, the held notes and the notes one and two octaves above them arpeggiate.

Содержание Prophet Rev2











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды