manualshive.com logo in svg

Dave Smith Instruments Prophet Rev2, Руководство пользователя

Поделиться
Скачать
Dave Smith Instruments Prophet Rev2 Скачать руководство пользователя страница 24

14

Global Settings

Dave Smith Instruments

Global Settings

Press the 

global

 button and use the 

parameter

 and 

value

 knobs to scroll 

through and set parameters such as Master Tune and MIDI Channel that 
affect all programs globally.

1. Master Coarse Tune:

 -12…+12—

Master Transpose control, 0 is 

centered. Steps in semitones up to one octave up (+12) or down (-12).

2. Master Fine Tune:

 -50…+50—

Master Fine Tune control; 0 centered. 

Steps in cents as much as a quarter-tone up (+50) or down (-50).

3. MIDI Channel:

 All, 1…16—

Selects which MIDI channel to send and 

receive data, 1 to 16. Choosing 

all

 receives on all 16 channels.

4. MIDI Clock Mode:

 

Sets the synthesizer’s ability to send and receive 

MIDI clock messages:

•  Off: MIDI Clock is neither sent nor received
•  Master: MIDI Clock is sent, but not received.
•  Slave: MIDI Clock is received, but not sent.
•  Slave Thru: MIDI Clock is received and passed to MIDI Out

•  Slave No S/S (no start and stop): Receives MIDI Clock but does not 

respond to MIDI Start or Stop command.

In Slave and Slave Thru modes, if no MIDI clock is present at the selected 

input, the arpeggiator and sequencer will not function.

5. MIDI Clock Cable:

 MIDI Port, USB—

Sets the port, MIDI or USB, by 

which MIDI clocks are received.

6. MIDI Param Send:

 Off, CC, NRPN—

Changes to the values of front 

panel controls are transmitted via MIDI as Non-registered Parameter 
Number (NRPN) controllers or as Continuous Controllers (CC). Trans-
mission of parameters can also be turned off. See 

MIDI Implementation 

on page 79 for details.

NRPNs are the preferred method of parameter transmission, since they cover 

the complete range of all parameters, while CCs are limited to a range of 128.

Содержание Prophet Rev2











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды