Dave Smith Instruments Prophet Rev2, Руководство пользователя

Страница: 70 / 202

31 Prophet Rev2 User’s Guide Low Frequency Oscillators
The LFOs can be free-running or synced to the arpeggiator, sequencer, or
0,',FORFNIRUWHPSRV\QFHGHIIHFWVVXFKDV¿OWHUVZHHSVWUHPRORDQGVRRQ
Shape: Triangle, Sawtooth, Reverse Sawtooth, Square, Random
—This
button sets the waveshape of the selected LFO.
Frequency:
Sets the frequency of the selected LFO from a slow .022Hz
to a fast 500Hz. This is affected by the
clk sync
(clock sync) parameter
as explained below.
Clk Sync:
When on, the LFO synchronizes with the master clock, which
controls the arpeggiator, sequencer, and certain effects.
Destination:
Routes the selected LFO to one of the many modulatable
destinations within the synthesizer. You can also use the modulation
matrix to route an LFO to additional destinations.
Amount:
Sets the amount of LFO modulation routed to the selected
destination. Setting an amount here applies the selected modulation
continuously. You can also use the modulation matrix to route an LFO
to additional destinations and use a different modulation amount if you
want.
Key Sync:
When enabled, this makes the LFO wave cycle reset when
you press a key (but is not reset if you press a key while other notes are
held).
There is a shortcut for routing an LFO to a front-panel destination (provided
that the destination is a valid destination). Simply hold down the selector button of the
desired LFO, then and move the knob or control you want to use as a destination (the
¿OWHUFXWRIIIRUH[DPSOH6HWWKHDPRXQWXVLQJWKH/)2
amount
knobs. Be aware that
not all front-panel controls can be used as a modulation destinations.