Dave Smith Instruments Prophet Rev2, Руководство пользователя

Страница: 40 / 202

16 Global Settings Dave Smith Instruments
13. Local Control: Off, On—
When on (the default), the keyboard and
front panel controls directly affect the Prophet Rev2. When off, the
controls are transmitted via MIDI but do not directly affect the “local”
synth (that is, the Prophet Rev2). This is primarily useful for avoiding
MIDI data loops that can occur with some external sequencers.
14. Velocity Curve: Curve 1... Curve 8—
Sets one of the eight velocity
curves for the keyboard to adjust the velocity response to your playing
style.
15. Pressure Curve: Curve 1, Curve 2, Curve 3, Curve 4—
Sets one of four
pressure curves for the keyboard to adjust the aftertouch to your playing style.
16. Mono/Stereo: Stereo, Mono—
The Prophet Rev2 defaults to stereo
operation. When set to Mono, this parameter defeats all pan settings and
modulation, effectively making each of the outputs a mono output.
17. Pot Mode: Relative, Passthru, Jump—
The rotary controls on the
Prophet Rev2’s front panel are a mixture of “endless” rotary encoders and
SRWHQWLRPHWHUVRU³SRWV´7KHSRWVDUHLGHQWL¿DEOHE\WKHLUOLQHGNQREV
and the fact that they have about 300° of travel. There are three pot
modes to determine how the synth reacts when the programmable param-
eters are edited. (Master volume is not programmable, so these modes
don’t apply.)
When set to
relative
, changes are relative to the stored setting. In Rela-
tive mode, the full value range is not available until either the minimum
or maximum value and the respective lower or upper limit of the pot’s
travel is reached.
For example, the Resonance parameter has a value range of 0 to 127.
Let’s say the physical position of the Resonance pot is the equivalent of
a value of 100. If you switch to a program that has a stored Resonance
setting of 63 and turn the pot all the way up, it will only go to 90. To get
WRWKHPD[LPXPYDOXHRI\RX¿UVWKDYHWRWXUQGRZQXQWLOWKHYDOXHLV
at the other extreme and the pot is at the limit of its travel (in this case, 0
and fully counter-clockwise, respectively).
In Passthru mode, turning the pot has no effect until after the edited value
equals the preset value (that is, until the edited value “passes through”
the stored value).