SPRAY VALVE DAS 90
pag
. 3
1 INTRODUCTION
1.1 The manual
The user guide is the document that accompanies the valve from the time of its construction and throughout the period of
use, it is therefore an integral part of the valve. It requires reading the manual before taking any action involving the valve. The
manual must be readily available for use by staff and maintenance of the valve. The user and the attendant use are required
to know the contents of this manual.
Reproduction of any part of this manual, in any form, without the express written permission of DAV Tech. The text and
illustrations in this manual are not binding, the DAV tech reserves the right, at any time and without notice, the right to make
any changes to improve the product or for reasons of character manufacturing or commercial.
1.2 Warranty
The warranty is valid for a period of 12 months from the date of commissioning and no later than 15 months from the
date delivery. The interventions carried out during the warranty period does not extend in any way the validity period of the
guarantee. The seller is not liable for defects caused by normal wear of parts which by their nature are subject to wear.
1.3 Goods receiving
The original configuration of the valve must never be changed.
Upon receipt of the goods, check that:
• The packaging is intact
• The exact correspondence of the material ordered.
2 TECHNICAL DESCRIPTION
2.1 Valve Operation
The DAS 90 spray valve has been designed and built to be used in different applications. Its design and its versatility make
it suitable for any application requiring the use of spraying valves. The DAS 90 valve is a low and medium viscosity fluid
dispenser. The valve is pneumatically controlled by external solenoid valves. Sturdy and compact, it has the particularity of
having nozzle and hood covered in non-stick material. With appropriate gaskets it can be used for spraying solvent or acetate
based adhesives.
2.2 Technical Specification
Model
DAS 90
Drive
Single acting
Weight
310g
Max fluid pressure
Max 10 bar
Actuating air pressure
5 - 7 bar
Atomizing air pressure
from 0.1 to 3 bar
Type inlet air
6x4mm Tube
Type inlet fluid
6x4mm Tube
Air cap
For round spray
Speed
Up to 200 cycles / min
Adjusting the passage
Micrometric
Used materials
Stainless steel, nickel-plated brass
Fluids to be dispensed
Oil, lubricants, water based paints, primers, inks (need to be tested)
