Datum bc632D, Руководство пользователя

Страница: 39 / 82

OPERATION AND PROGRAMMING
Datum Inc bc632D Wall Mount LED Display (Rev A) 3-13
Clr Autosync? Turn off Autosync feature.
When the first item is displayed, the number keys can not be used to select the other items in the list,
since the number keys are used to set the time. However, the number keys do select items in the list
when items 2 through 4 are displayed.
When you first press the SET TIME key, the display will read "TIME hh:mm:ss." You may press the
ADV key to scroll through the current time, and make changes. Or, you can type in the new time in
exactly the format shown above. The day of week will be calculated automatically by the bc632D.
The "Sync clock" item lets you set the internal clock to the same time as the current time source. The
message will be "Sync clock?" You may press “Y,” RETURN, or RUN to start the setting process. If
you do not want to synchronize the clock to the time source, you may press a number key (1-4) or
SELECT to select another item, or you may press PROGRAM to abort.
Autosync sets the display to automatically synchronize the internal clock to the time source each time
power is applied to the display. When the display reads "Set Autosync?" you may press “Y,”
RETURN, or RUN to activate this feature. If you do not want to activate the autosync feature, you
may press a number key (1-4) or SELECT to select another item, or you may press PROGRAM to
abort.
The autosync feature is disabled by selecting the message "Clr Autosync?" and pressing “Y,” RETURN,
or RUN. If you do not want to deactivate the autosync feature, you may press a number key (1-4) or
SELECT to select another item, or you may press PROGRAM to abort.
3.3.12 EVENT (SHIFT-E) - CHANGE EVENT CAPTURE PARAMETERS
The bc632D can display the time at which an external event occurred. The event time is displayed to
milliseconds.
E: HH:MM:SS.mmm Captured Time. (mmm = milliseconds).
Clear Event? Clear the current event time to allow for a new event.
Rising Edge? Set event to be captured when input goes high.
Falling Edge?
Set event to be captured when input goes low.
No Edge?
Disables event capture input.
When you first press the EVENT key, the display will read "E:--- --:--.--." If a time has previously
been captured, the dashes will be replaced by digits indicating the time of the event. To clear the event