manualshive.com logo in svg

Datum bc630AT, Руководство пользователя

Поделиться
Скачать
Datum bc630AT Скачать руководство пользователя страница 3

Datum Inc

bc630AT Real Time Clock Module

1-1

CHAPTER ONE

INTRODUCTION

1.0  GENERAL

The bc630AT Real Time Clock Operation and Technical Manual provides the following information:

•

 

General Introduction.

 

•

 

Installation and Setup Details.

 

•

 

Operation and Software Interface Details.

 

•

 

I/O Signal Information.

 

•

 

Theory of Operation.

 

•

 

Programming Examples.

 

•

 

Drawing Set.

1.1  KEY FEATURES

The salient features of the bc630AT Real Time Clock include:

•

 

Real Time Clock operation with microsecond precision.

 

•

 

Decodes commonly used time code formats: IRIG B, IRIG A, NASA 36 and 2137.

 

•

 

Master/Slave operation allows digital synchronization of multiple bc630AT's.

 

•

 

Time base can be synchronized to external 1PPS or 1, 5, 10 MHz reference frequency.

 

•

 

Continues to provide time, 'flywheels', during loss of the external time code source.

 

•

 

Battery backed Real Time Clock maintains settable time during power loss and can be 
synchronized to an external time code.

 

•

 

Battery backed control values allow one-time setup.

 

•

 

Supports external event time capture input.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание bc630AT























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды