manualshive.com logo in svg

Datum bc630AT, Руководство пользователя

Поделиться
Скачать
Datum bc630AT Скачать руководство пользователя страница 22

   

OPERATION AND SOFTWARE INTERFACE

Datum Inc

bc630AT Real Time Clock Module

3-11

92H     10H     no associated data (Successful reset to battery backed values)
        

1EH 

no associated data (Checksum failure of battery backed values - Default control 

values loaded)

<Process Masks Register Only>

93H     13H     no associated data

com

ready                    data

byte   flag     offset / bits 7-4 / bits 3-0                         

<Synchronize RTC IC>  Synchronizes the battery backed RTC to the external time source being 

    decoded. 

94H    14H     no associated data

<Synchronize Heartbeat Pulses/Interrupts>  Loads and synchronizes HBRATE1, HBRATE0 to

           the current time source.

95H

15H

no associated data

  

3.4  FUNCTIONAL DESCRIPTION

Section 3.1 and 3.2 provided an overview of the bc630AT control, command, and data registers.  This
section provides a description of how these registers are used to achieve the desired functions.

3.4.1 CONTROLLING THE OPERATING MODE OF THE bc630AT

To control the operating mode of the bc630AT, first write the appropriate data to the Control
Registers.  Then, to cause the bc630AT to take action on the Control Register data, issue the  'Initialize'
command by writing 90H to the Command Register (offset 0EH).  This action will cause the bc630AT
to initialize and act on the data in the Control Registers.  When the bc630AT is initialized and ready to
accept another command, it will return the ready flag value of 10H to the Command Register (offset
0EH).

Not

e

: Polling rates of the Command Register must not exceed 500 kHz.

In Version 3.0 firmware commands 94H ('Process Masks Register') and 95H ('Synchronize
Heartbeats') are available which allow the Masks Register and Heartbeat Register data to be processed
without reinitializing the bc630AT.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание bc630AT























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды