Dato LJS6035, Руководство пользователя

Страница: 14 / 29

USER ’ S MANUAL
14
Chapter 4 INSTALLAION
SKILLED AND AUTHORIZED PERSONNEL ONLY SHOULD BE ALLOWED TO
PERFORM THESE OPERATIONS, FOLLOW ALL INSTRUCTIONS SHOWN BELOW
CAREFULLY, IN ORDER TO PREVENT POSSIBLE DAMAGE TO THE CAR LIFT OR
RISK OF INJURY TO PEOPLE.
Skilled technicians only appointed by the same manufacturer or by authorized dealers, are allowed to install
the car lift.
INSTALLATION REQUIREMENTS
⚫ The car lift must be installed according to the specified safety distances from walls, pole and what
other equipments stated.
⚫ The specified safety distances from
walls must be 1000 mm at least, taking
into consideration the necessary space
to work easily. Because space for the
control site and for possible runways in
case of emergency is also necessary.
⚫ The room must be previously arranged
for the power supply and pneumatic
feed of the car lift.
⚫ The room must be 4000 mm in height,
at least.
⚫
The car lift can be placed on any floor,
as long as it is perfectly level and
sufficiently resistant. (≥250kg/cm²,the thickness of concrete≥150mm)
⚫ All parts of the machine must be uniformly lit with sufficient light to make sure that the adjustment
and maintenance operations can be performed safely, and without reflected light, glare that could give
rise to eye fatigue.
⚫
The integrality of arrived goods should be checked before the lift is installed.
⚫ Moving and installing lift should follow the process as the picture instructs.
The transport and storage of machine refers to “TRANSPORT AND STORAGE” on page 4.
Platform Installation:
-Place two platforms on the position of the location
-The bottom of cylinder is located in the frontage of machine
(the direction of getting on the vehicle)
-Use fork car or other lifting equipments to lift the platform
(Picture14) and make sure that the safety equipment of
machine is both turned on and locked.
Picture 13
Picture 14