Dato LJCC2045A, Руководство пользователя

Страница: 8 / 17

8
Chapter 3 Installation
3.1 INSTALLATION NOTIC
-Improper installation will cause damage to machine or personnel. We do not take responsibility to any direct or
indirect damage due to improper installation or operation.
-The proper installation floor should be level, to ensure level lifting and lowering. Any slant can affect the
performance of the machine.
-Forbid to install the machine on asphaltum floor. According to the floor requirement, can only install machine
on good condition concrete floor, no crack and other defects .
-Without certify permit from architect, forbid to install machine on the floor which has empty room downstairs.
-Avoid installing machine near warming device, water faucet, air humidifier and ingle.
-Power supply: Before installation, get ready for the power supply.
3.2 INSTALLATION PROCESS
3.2.1 GENERAL ORIENTATION
-Lift can only be installed on concrete with steel to reinforce.
Thickness of concrete ≥ 200mm
，
to ensure the intensity reach to 3000PSI
（
2.1Kg/mm
2
）
upwards
。
-Height of indoor should be over 4000 mm
，
regard to hold enough space for all lifting vehicles(approximate 4m
from the lift center)
-Distance from post to wall should be at lease 1200mm. In case of emergency situation or working convenience,
should consider about enough space for safety channel.
3.2.2 FLOOR LAYOUT
It’s very important for the floor layout (picture 3). If it’s not correct, there may be some
problems during installation and operation. The total level error is less than 4mm, which
can decrease the problems during final installation.
Picture 3 (floor layout)