Datex-Ohmeda D-VHC17 Скачать руководство пользователя страница 41

Страница: 41 / 72

Displays and Controller Boards

Document No. 8001004-1

5.1

Keyboard menu

The service menu for testing the command board functions and for setting the K-ARK and

K-ICU types.

Upper Led

is for testing the upper alarm LED (red) on the command board. When the text

is highlighted, the upper alarm LED can be turned on and off by pressing the ComWheel.

Lower Led

is for testing the lower alarm LED (yellow) on the command board. When the

text is highlighted, the lower alarm LED can be turned on and off by pressing the

ComWheel.

Dummy Press

is for testing the ComWheel. When the text is highlighted, pressing of the

ComWheel create a sound from the loudspeaker and the corresponding number on the

service data field increase.

Service Data
Message count

counts the number of messages that are sent out to the main CPU board.

Leds upper

and

lower

indicate the states of the alarm LEDs on the command board.

Direct action keys

texts are indications to the command board membrane keys. When a

key on the command board is pressed, the corresponding text in the menu changes its

colour.

Control wheel, Press

counts the ComWheel pressings.

Control wheel, Clockwise

and

Counterclockwise

the ComWheel turnings.

Since

shows the date and the time of the last run time reset.

Содержание D-VHC17









































































Результаты поиска

Содержание D-VHC17

Отзывы:

Бренды по названию

Популярные бренды

Datex-Ohmeda D-VHC17, Техническое справочное руководство

Результаты поиска

Содержание D-VHC17

Отзывы:

Бренды по названию

Популярные бренды