Datex-Ohmeda D-VHC17 Скачать руководство пользователя страница 33

Страница: 33 / 72

Displays and Controller Boards

Document No. 8001004-1

3.2.6

LCD Display, D-LCC15

Tools needed

Central Unit, B-DISP, Keyboard, K-ANEB/ K-ICUB and screwdriver

Disconnect and check the LCD display interface cable:

The monitor side connector:

−

the connector pins are clean and straight and at about the same height

−

the locking screws are intact

The display side connector:

−

the screw(s) on the casing is tightened properly

−

the connector pins are clean and intact

−

the locking screws/claws are intact

Check also that the cable itself is intact.

Leave the cable disconnected.

Detach the rear cover by removing the four screws under the gray pads and two small black

screws on the bottom (middle).

Check internal parts:

−

all screws are tightened properly

−

all cables are connected properly

−

all IC’s that are on sockets are attached properly

−

there are no loose objects inside the display

Reattach the rear cover.

Check external parts:

−

the outer cover is intact

−

the display screen is intact

−

the block screws for the cable are in place and are tightened properly (if installed)

−

the block screw threads are intact (if installed)

•

Connect and lock the LCD interface cable to the LCD display and to the used B-DISP in the

monitor. Check that the display power cord is locked to the display.

•

Turn the LCD display ON/STBY -switch to ON.

Содержание D-VHC17









































































Результаты поиска

Содержание D-VHC17

Отзывы:

Бренды по названию

Популярные бренды

Datex-Ohmeda D-VHC17, Техническое справочное руководство

Результаты поиска

Содержание D-VHC17

Отзывы:

Бренды по названию

Популярные бренды