Dateq TRI-O, Руководство пользователя

Страница: 9 / 12

8 Dateq Manual TRI-O Operation EN
Microphone with TalkOver (1)
A microphone can be connected to this channel (at the front, or at the rear). The channel has a
gaincontrol, a dual equaliser and an input-selector.
GAIN
A, B, C
A, B, C
Volume preset for both the Mic Front and the Mic
Rear input.
HIGH High tone control.
LOW Low tone control.
Mic Front/Rear Input selector.
TALKOVER Enables or disables the TalkOver circuit. When
the button is pressed the LED lights up green
and the TalkOver function is enabled. When you
speak in the microphone all the other channels
will be attenuated and the LED will light up red to
indicate voice-over activity.
Fader 60mm fader which can be used to control the
volume of this channel.
Combined microphone/ line channel (2)
This channel can be used to connect a microphone or a stereo line-signal. The channel has a gain-
control, inputselector and pre-fader listening (CUE).
GAIN Volume preset for both the microphone and the
stereo-line input.
HIGH High tone control.
LOW Low tone control.
Mic/ Line Input selector.
CUE Enables/ disabled pre-fader listening. When the
button is pressed the signal on this channel can
be heard on the headphones and is showed on
the VU-meters. The master CUE LEDs will turn
off.
Fader 60mm fader which can be used to control the
volume of this channel.
2
Line 1
Line 2
Select the outputs where you want to use this
channel.
Select the outputs where you want to use this
channel.