EN
Dateq
Manual
TRI-O
Operation
9
Stereo line input (3 ... )
6
Two stereo line inputs can be connected to this channel. Each channel has an input-selector, pre-
fader listening and a gain-trimmer on the connectorboard.
Line 1/ Line 2
Input selector.
CUE
Enables/ disabled pre-fader listening. When the button
is pressed the signal on this channel can be heard on
the headphones and is showed on the VU-meters. The
master CUE LEDs will turn off.
Fader
60mm fader which can be used to control the volume
of this channel.
Master
secti
(A B
)
on
, and C
The
has identical
TRI-O
3
mastersections (A B
). Each section has a dual equaliser, balance
, and C
and gain control and an after-fader-listen function.
HIGH
High tone control.
LOW
Low tone control.
BAL
Determines the balance between the left and the right
channel. When in mid-position, the left and right channel
can be heard evenly loud.
MASTER
Gaincontrol for the unbalanced stereo outputs (master
A and Master B) and the balanced stereo output
(master A only)
MASTER
Switches the headphone source between master A
CUE
and master B. The LED indicates the source (master A
or master B). When the CUE function of an input-
channel is activated both master-CUE LEDs will be
switched off, and the input-channel will be selected as
headphone source.
Содержание TRI-O
Страница 1: ...USER MANUAL...
Страница 2: ......
