After assigning Turbo Rapid Fire to one or more buttons (see previous section) the Turbo
Indicator Light on both handles of the pad will illuminate. This indicates that Turbo Rapid
Fire is running in mode 1. To set the Turbo Rapid Fire to mode 2 or mode 3, tap ‘Turbo
Button 2’ one or more times.
To change the Turbo Rapid Fire mode at any time or disable it again, tap ‘Turbo Button 2’
(see the following illustrations). You can quickly disable and enable Turbo Rapid Fire at
any time by pressing ‘Turbo Button 1’. Enabling Turbo Rapid Fire using ‘Turbo Button 1’
will load your previous Turbo Rapid Fire configuration.
Because this TurboFire 2 controller has a unique online software update feature, Datel
warrants that this controller will always be compatible with your Xbox 360 console and
any Dashboard updates. In the unlikely case that a future software update from Microsoft
causes the TurboFire 2 controller to stop working, Datel offer two easy solutions.
1.
The TurboFire 2 controller includes a USB connection. If
your controller is no longer recognized after a Microsoft
system update, you can simply connect your controller
to any PC via USB and download the controller software
update from Datel’s website, www.codejunkies.com
2.
If you do not have access to a computer, you can send
your TurboFire 2 controller to Datel Customer Service at
no charge and we will update your controller and send
it back to you.
This amazing software update feature means that you can also download any of the
special control configurations that our Datel programmers are creating for all the hottest
games! See www.codejunkies.com for details.
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
1
off
2
3
8. FCC Rules Part 15.
Step 2: Enable rapid fire and set the fire mode
7. Compatibility Warranty
