The left and right analogue sticks can also be pressed as buttons.
Before you can use the TurboFire 2 Wireless Controller for the first time you need to sync
it with your Xbox 360.
To do this, press the ‘Home Button’ on the front of the controller so that the player
indicator number lights begin to flash continuously. Next press and hold the ‘Sync’ button
on the rear of the controller so that the player number indicator lights whilst continuing
to flash alternate between the player numbers. To complete the syncing process, press
the ‘Sync’ button on the front of the machine.
After a few seconds the controller and console will be synchronised and a player number
will be assigned to the controller. The player number indicator lights will indicate the
assigned player number.
The TurboFire 2 controller is equipped with a unique programmable Turbo Rapid Fire
function that can boost your firepower in any Xbox 360 game. The Turbo Rapid Fire
function has 3 mode settings and can be assigned to wide range of buttons.
Each of the mode settings allow the Turbo Rapid Fire to run at its fastest speed but each
mode includes a very slight timing difference which is required for some games.
By default, Turbo Rapid Fire is assigned to the right trigger button but different games will
use different buttons for actions like jump, shoot, block etc. In order for you to get the
most out of the Rapid Fire function you can choose exactly which button or buttons it is
assigned to.
To program which buttons will use Rapid Fire, press and hold the ‘Turbo Button 2’ and
then any one of the buttons shown in the illustration below. When you have made your
selection, release ‘Turbo Button 2’.
Turbo Rapid Fire can be enabled on the following 8 buttons:
Start
Y
X
B
A
LT Button
LB Button
Press one or more of these buttons
Press and
Hold Turbo
Button 2
RT Button
RB Button
1
2
Button
Button
Button
Button
Y
X
B
A
Step 1: Choose Rapid Fire Buttons
6. Using the Turbo Rapid Fire function
5. Syncing the Controller
4. Controller Button Layout
