1 DATECS
ZEBRA PD20/PD20-1
USER MANUAL
UM 07.01.31/v1.4.0 13
Bluetooth Pairing
Turn on PD20/PD20-1, connect it to PC via USB cable. When device is connected to PC, will create
virtual COM port. Check on device manager on which port is connected. After that run the special
application for PC (Fig. 3)
. Press “Search” button on the app, and in right side will be show all available
COM ports. Select on which is connected device, then press
“C
onnect to device
”. F
rom Bluetooth
management on mobile device (equipped with BLE 4.2) select connect to PD20/PD20-1, then on mobile
device screen will be show PASSKEY (Fig. 6). White LEDs will start to light one by one continually, on
special app will be show Passkey (Fig. 4)
, if they are same press “
On/Off
”
two times on PD20/PD20-1
to confirm (Fig. 5)
, then special app return message “THE DEVICES ARE CONNECTED”
(Fig.7 when on
each device is confirming pairing). If Passkey is being
different press “On/Off” button
one time on
PD20/PD20-1 to cancel pairing.
Figure 3
Figure 4
Figure 5
Figure 6
