Datcon DT9500, Руководство по эксплуатации

Страница: 72 / 100

DT9500
72
20220103-V2

Access is possible
by supervisor code only

Changing the Supervisor Code ( S upervisor C ode)
The new Supervisor Code must be typed in twice, in order
to avoid any typing errors. The mnemonic

( R e-
Typ e) warns you to type the code for the second time, after
you have typed it once. If the two codes are not identical
with each other, the mnemonic

( Bad C ode)
appears on the display, and the instrument exits the menu
item.
Make sure not to forget the Supervisor Code, otherwise a
new one can be defined in the service only. [Default factory
setting: 100]



Access is possible
by supervisor code only

Display mode ( L C D )
•

: four-and-a-half-digit mode (-19999 - 19999).
•

: three-and-a-half-digit mode (-1999 - 1999).
[Default factory setting: four-and-a-half-digit]

Access is possible
by supervisor code only

Disable displaying leader zeros ( L eader N ull)
•

: the leader zeros are displayed
•

( Sp a ce ): the leader zeros are not displayed, only
one standing before the integer [Default factory setting:
leader zeros are displayed]

Access is possible
by supervisor code only

Erase of min. / max. value ( R eset M in. & max.)

choosing erases min. and max. values

Access is possible
by supervisor code only

Restoring the default settings ( R eset 1 )
When you select

, all the parameters will be reset to
the default factory setting, and the instrument restarts.
It is not possible to withdraw this command subsequently!