Datcon DT9000, Руководство по эксплуатации

Страница: 73 / 96

DT9000
20171205-V2
73
Setting the physical
value assigned to 20 mA 1. Pressing the ▲ button keep stepping as long as you see
this menu item:

.
2. Enter the menu item by pressing the ENTER button.
3. Pressing the ▲ button you can increase the value of the
blinking number:
4. Pressing the
► button you can select the next digit.
5. Set the value

.
6. Press the MENU button, to exit from the menu item, and
you see this:

.
Disabling the leader
zeros 1. Pressing ▲ button keep stepping as long as you see this
menu item:

.
2. Enter the menu item by pressing the ENTER button.
3. You see this

on the display. The mnemonic is
blinking.
4. Pressing the ▲ button switch to the 

mnemonic.
5. Press the MENU button, to exit from the menu item, and
you see this:

.
Exit the menu
1. Press the MENU button. First the mnemonic

( Exit ), then the mnemonic

( Save ) is displayed. With
this the storing of the settings is completed. The instrument
has exited the menu and goes on with the measurement.