Datcon DT4240 Series, Руководство по эксплуатации

Страница: 31 / 76

DT4240 xx xx xx xx
20230503-V0
31
7.3. Display brightness (01. menu item)
Function The brightness can be set between 10%-100%, in 10%
steps.
[factory default: 100%]
Sequence of operations 1. Enter the menu by the user or the supervisor code.
Chapter 7.1. Typing the code in describes how you can
type the code in.
You see on the display:

.( Bri ghtness = brightness)
2. Enter the given menu item by pressing the
ENTER
button.
3. You can read the mnemonic:

. ( Br ightness =
brightness). The value 100 is blinking, it signs that it can be
modify.
4. Pressing the
▲ button, select the desired value.
For example: you see on the display:

. If you have
choosen 50%.
Exit from the menu item 1. After finishing the settings, press the MENU button to exit
from the given menu item, and you see:

.
(2. If you want to change the settings you have done just
now, or if you just want to check what you have typed in, go
on with the operation from point 2 of the
Sequence of
operations .)
(3. If you don’t want to exit the menu (you want to do further
settings), then you may select the desired menu items by
pressing the
▲ button.)
Exit from the menu
1. Press the MENU button. First the mnemonic

( Save ), then the mnemonic

( Exit ) are shown on the
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.