6
TBC-5000 Rear Panel
The input select switches can be set to CV (Composite Video)
or S (S-Video (Y/C)).
Use this switch to set input/output mode: 4/4, 4/2 and 4/1 for matrix
switcher application.
4/4 Mode:
Ch1~4 input straight pass through to Ch1~4 output.
4/2 Mode:
Ch1 input to Ch1 output (when front panel set Ch1)
Ch2 input to Ch1 output (when front panel set Ch2)
Ch3 input to Ch2 output (when front panel set Ch1)
Ch4 input to Ch2 output (when front panel set Ch2)
4/1 Mode:
Ch1~4 input to Ch1 output.
PC Mode
Select PC mode to update Firmware via RS-232 9pin Sub D serial port.
MASTER / SLAVE
Assign TBC-5000 as Master or Slave when linked to a second TBC-5000
the Slave unit will follow the actions of the Master unit.
RS-232 (Select PC mode)
9-pin Sub D serial port standard RS-232 interface.
Connect PC to update firmware.
3.5mm GPI jack (Select Master or Slave)
Using a 3.5mm GPI jack to jack cable you can have limited control of two
TBC-5000 units from the Master units Front Panel.
Composite (BNC) and S-Video (Y/C) IN
Composite and S-Video inputs for connecting Analogue Video devices /
loop through confidence monitors such as the TLM-702 to the TBC-5000.
Both Composite and S-Video can be connected without any conflict.
Composite (BNC) and S-Video (Y/C) OUT
Composite and S-Video outputs for connecting Analogue Video devices /
monitors to the TBC-5000.
Both Composite and S-Video can be connected without any conflict.
