4
Warranty
Datavideo warrants that the equipment it manufactures shall be free from defects in material and
workmanship for a period of 12 months from the date of product purchase. If this equipment fails due
to such defects, Datavideo will, at its option, repair or provide a replacement for the defective part or
product. Equipment that fails after the warranty period, has been operated or installed in a manner
other than that specified by Datavideo, or has been subjected to abuse or modification, will be
repaired for time and material charges at the Buyer’s expense.
This warranty does not affect your statutory rights within the Country of purchase.
Disposal
For EU Customers only - WEEE Marking
This symbol on the product indicates that it should not be treated as household
waste. It must be handed over to the applicable take-back scheme for the recycling of
Waste Electrical and Electronic Equipment. For more detailed information about the
recycling of this product, please contact your local Datavideo office.
Packing List
Item No.
Description
Quantity
1
TBC-5000 Instruction Manual
1
2
TBC-5000 TBC & Matrix Switcher
1
3
Switching Adaptor DC 12V/1.5A
1
TBC-5000 Features
4 Channel TBC & 4:2:2 Frame Synchroniser.
Selectable Video Matrix output settings of 4 in 4 out (4/4), 4 in 2 out (4/2) and 4 in 1 out (4/1).
Accepts Studio/Genlock Sync input on BNC and can pass that sync on via BNC to other
equipment.
A choice of up to 4 Composite (CV on BNC) or S-Video (Y/C on 4pin mini din) inputs and
outputs.
Dip switch channel selections for Automatic Gain Control and VTR signal revision.
4 Back lit Front Panel Source Selection buttons for switching sources in 4/1 or 4/2 modes.
Can be set as Master or Slave to another TBC-5000 via 3.5mm Jack to Jack GPI control
cable.
Unit can be set to operate in PAL or NTSC environments (see dip switches 1 & 2).
Please note: the TBC-5000 cannot convert from PAL to NTSC or vice versa.
