Datavideo SEB-1200, Инструкция по эксплуатации

Страница: 15 / 90

15
To create this simple dedicated SE-1200 MU IP network you will need:

An IP router which can assign/give IP
addresses

Two RJ-45 patch leads

Windows 7/8/10 laptop or PC

The IP router Administrator login and
password

The Datavideo SE-1200
MU controller software
Instructions
1. First connect the router to the SE-1200 MU and the Windows computer using two RJ-45 patch leads.
2. Turn on the Windows computer and set it to DHCP setup within the Windows Network and Sharing
Centre .
3. Now click the Windows start button and run the CMD prompt window.
4. At the command line > : _ type IPCONFIG and press enter.
5. The DEFAULT GATEWAY number displayed should be the router’s current IP address.
6. Enter the DEFAULT GATEWAY IP address into the address bar of the computer’s web browser.
7. The web browser should display the login window for the router. Enter the router’s login and/or
password. The login details may be written on a sticker on the router itself or noted in the manual for
the router.
8. Once logged into the router we need to change the router to supply IP addresses in the
192.168.100.xxx range. Use the router’s LAN Setup or Configure LAN option to set the router’s IP
address as 192.168.100.1 and click save / apply .
9. Now reboot the router and power ON the SE-1200 MU.
10. Log into the router again using the web browser and the router’s new IP address 192.168.100.1 .
11. Use the router’s LAN Setup or Configure LAN option again, within this option there should be another
option called Address Reservation or Client List .
12. The two devices connected to the router should be listed here, the computer and the SE-1200 MU.
13. The computer, because it is set for DHCP, will already have an IP address automatically assigned to it in
this list.
14. The SE-1200 MU may only show its MAC address (1E:ED:19:27:1A:B3) . Copy and Paste the SE-1200
MU’s MAC address into the MAC address reservation box. Now enter the following IP address
192.168.100.101 into the reservation box next to the SE-1200 MU’s MAC address.
15. The router should now give the IP address 192.168.100.101 to the SE-1200 MU when it is connected to
the router.
16. Click save / apply then reboot the router again.
17. Close the web browser and CMD windows.
18. Now open the installed SE-1200 MU control software on your computer.