13
LCD Menus
Home Menu
The Home Menu provides a basic top-level to the menu system
Here you can set the M/E Trans time, the DSK Trans time, & the FTB Trans time
Wipe Menu
The Wipe menu provides controls for the M/E Wipe generator
Main Wipe Menu
The Main Wipe Menu allows selection of the current Wipe Pattern
16 wipe pattern icons are displayed at a time. The current Wipe Pattern is highlighted
You can select a new wipe pattern by touching the appropriate icon.
The Up & Down arrows page up & down through the Wipe patterns, in groups of 16
* There are currently 32 wipe patterns supported
Wipe Select control
The wipe select control provides an alternative way to select the current wipe pattern
o
Use the rotary control to scroll through the wipe patterns
o
Or touch the control & use the numeric key pad to enter the wipe pattern number
Soft Control
This sets the softness of the wipe edge
The values is the width of the wipe edge as a percentage of the screen width
o
I.e. 10% = 10% of the screen width
o
100% = 100% of the screen width
You can adjust this value using
-
the Rotary Control
-
the touch the control, then use the numeric keypad
-
the joystick X-Axis
Width Control
This sets the width of the Wipe Border
The values is the width of the wipe edge as a percentage of the screen width
o
I.e. 10% = 10% of the screen width
o
100% = 100% of the screen width
You can adjust this value using
-
the Rotary Control
-
the touch the control, then use the numeric keypad
-
the joystick Y-Axis
Level Control
This shows/sets the current level of the transition
It’s range is 0.000 to 1.0000
The normal way to adjust the wipe level is using the T-Bar however
