Datavideo PTR-10MKII, Инструкция по эксплуатации, Страница: 21 / 48

21
If the LANC mode is enabled, connect the Remote port of PTR-10 MARK II to the camera’s 2.5 mm
earphone jack via a remote cable. The remote cable is an 8pin mini-din to 2.5mm phone jack cable as
depicted below. The pinout information is also shown.
8pin mini-din 2.5mm phone jack
1 1
6
8
3 2
4 3
Warning: The 8pin snap-and-lock mini-din connector of the remote cable will be securely fastened
once plugged into the Remote port. To remove, use two fingers to gently hold the part of the plug
labelled by two arrows then pull the connector outward.
Camera models allowing you to access certain camera functions in LANC mode are listed in the table
below.
Please note that Datavideo has specifically designed and manufactured the cable for connecting
the REMOTE port. The remote cable will be shipped along with the product. The part number of
the cable is G07620000138.
The table below lists all camera brands and models that work with the corresponding LanC options
as well as the functions that you can access via the PTR-10 MARK II.
LanC (Sony)
Model Brand
Power
Consumption
DC Input Accessible Fucntions
PXW-Z280V Sony 24 – 31 W 12V
Zoom, Focus, Iris, OSD Menu, OSD
Display, Shutter, White Balance
Mode, Gain and ND
Z90 Sony Zoom and Focus
PXW-Z190V Sony 22 – 29 W 12V Zoom, Focus, Iris and White Balance
PXW-Z150 Sony 6.3 – 6.6 W 8.4V Zoom, Focus and Iris
HNR-NX5R Sony 7.5 – 7.8 W 8.4V Zoom, Focus, Iris and White Balance
Two arrows