Datavideo PTR-10MKII, Инструкция по эксплуатации, Страница: 14 / 48

14
2.3 Installing your Camera
Follow the steps outlined below to install the camera:
1. First place the camera on the camera mount base.
2. Align the 1/4" screw hole found at the base of the camera with the 1/4" screw hole in the
camera mount base.
Note: If there is only a 3/8” threaded screw hole at the base of the camera, put a 3/8” to 1/4"
nut adapter in the hole then tighten with a coin or a flat head screwdriver.
3. Lastly secure the camera with a 1/4" hand screw.
Note: It is recommended to use a flat head screwdriver to tighten the 1/4" D-ring screw as this can
more effectively secure the screw.
Camera Mount Base
1/4" D-Ring Screw