Datavideo NVS-40D, Инструкция по эксплуатации

Страница: 15 / 100

15
Connect an SDI cable from this connector to a monitor
or projector with the SDI interface to output the SDI
input source
Others
LAN
The LAN port is an auto-negotiation 10/100/1000 Base-
T Ethernet port which connects the NVS-40 to an
Ethernet network through a standard RJ-45 Ethernet
cable.
DC IN 12V Power Connector
Power the NVS-40 device by connecting the device to an
AC outlet through a power cord and a power adapter. To
power off the NVS-40, simply disconnect the device from
the power source and any logged errors will be cleared.
All current settings are kept even after the device is
powered off.
Power Switch
You can switch this power switch for powering-on or
powering-off the NVS-40.
This is the Ground.