12
Seven segment display and LEDs
SHTR
When LED ON displays SHUTTER (speed) value.
GAIN
When LED ON displays GAIN value (in dB).
FILTER
When LED ON displays ND FILTER mode
Operation Modes – LOCK and NORMAL
There are two modes of operation on the MCU-100S.
NORMAL
:
This is always active when the unit is first turned on. Under this mode all functions are available. Buttons not
back lit indicate functions that are currently not in use. The user may activate these functions via an
associated ENABLE button.
LOCK
:
This mode is activated by pressing and holding down the CHECK button for two seconds. When in LOCK
mode all functions are unavailable except for the 4 Camera selection buttons and the CHECK function. This
is to prevent unauthorized or unintended operation during a LIVE production. The seven segment LED
display will also show Lock.
Iris controls can be quickly accessed in LOCK mode by pressing down on the IRIS Dial once; press the dial
again to return to full lock mode. When the Iris function is accessed in this way, if the MCU-100S unit is left
idle for 3 seconds or more then the unit will automatically return to full Lock mode.
The Lock mode can be deactivated by pressing and holding down the CHECK button for two seconds.
