Datavideo HS-1600T, Инструкция по эксплуатации

Страница: 28 / 96

28
Transparency
In this option, you will be able to adjust the transparency of the overall foreground key image.
*Note: Select Input 4 if you would like to use the video source connected to the HDMI input.
3.5 Audio
This option allows the user to configure various audio settings such as muting HDMI output audio, set
the audio type, selecting your tally type and etc.
Main Sub-Menu Options or Values Default Value
Audio
Mute OFF/ON Off
HDMI Input Input 1-4 / Follow Follow
HDMI Group Channel 1/2
Channel 3/4
Channel 5/6
Channel 7/8 Channel 1/2
Level Auto / SMPTE / EBU Auto
Tally Mode Normal / Audio Mixer Normal
Mute
The Mute allows you to turn ON/OFF the embedded audio component at the HDMI-in . The default is
OFF.
HDMI Input
In this option, you can select the audio source. Selection of input 1-4 allows the HS-1600T to play the
enabled audio source. If “
Follow ” is selected, the audio will enter Audio follow Video mode, i.e.
playback of the audio of the output video.
HDMI Group
The HDMI Group allows the user to assign the HDMI audio channel. The default audio channel pair is
Channel 1/2. You can select any of the four audio channel pairs.
Level
There are two different audio standards available for selection. The user can either select the EBU or
SMPTE standard. By selecting AUTO allows the device to automatically detect the audio standard.
When the image is 50 Hz, the audio follows EBU standard and when the image is 59.94/60 Hz, the
audio follows SMPTE standard.
Tally Mode
Tally output port generally sends two tally signals to each channel. In Datavideo products, Red
indicates On-Air, and Green indicates next camera source.
The HS-1600T provides two tally modes :
Normal : If in normal mode, tally lights of all camera sources displayed on the PGM monitor will be
turned ON (Red). These sources include PGM, PIP and Key sources. While the transition is in progress,
as the next video seen on the PGM monitor, tally light of the PVW source camera will then also be
turned ON (
Red ).
Audio Mixer : If the Audio Mixer mode is selected, only tally light of the PGM source camera selected
on the keyboard panel will be turned ON (Red). While the transition is in progress, the tally light color