36
5.
Firmware Update
Datavideo usually releases new firmware containing new features or reported bug fixes
from time to time. Customers can either download the firmware as they wish or contact
their local dealer or reseller for assistance.
This section outlines the firmware upgrade process which should take
approximately few
minutes to complete
.
The existing settings should persist through the
firmware upgrade process, which should
not be interrupted once started
as this could result in a non-responsive unit.
Firmware Upgrade Requirements
SSD
Latest firmware files
Upgrade Procedure
1.
Save the latest firmware files on the SSD.
2.
Install the SSD in a removable disk enclosure.
3.
Insert the drive enclosure into the recorder and move the locking latch from right to left
side to secure the drive enclosure in place.
4.
After turning on the HDR-90’s power, the firmware will be automatically updated.
5.
You should be able to see a progress bar displayed on the screen. Do not shut down the
recorder or remove the drive enclosure during the update process.
6.
You will be prompted to reboot the HDR-90 once the update is complete.
Note: If you are prompted that the firmware update fails, please reboot the HDR-90 to
restart the firmware update process.
Содержание HDR-90
