11
SET GPI TRIGGER MODE
– The DN-400 has two GPI trigger modes,
Pulse or Level trigger can be set.
See GPI Mode & Function Menus
for more details.
SELECT GPI FUNCTION
– The GPI function can be set to either Play
/ Play Pause or Record / Record Pause.
See GPI Mode & Function
Menus for more details.
SET DATE & TIME
– Sets the date and time on the DN-400; the
setting is non-volatile so it is stored when the unit is powered off.
See
Set Date & Time Menu for more details.
SET DV TC. STAMP –
When enabled allows the unit to record the
Time Code stamp from a DV input.
SET FULL SYT
- Occasionally DV devices can suffer from conflicts. In
the event of the DN-400 conflicting with another device Set Full Syt is
enabled to overcome the conflict.
FORMAT HARD DISK
- Formats the HDD and erases all files and
tracks from the DN-400 drive.
See Format Hard Disk Menu for more
details.
ERASE TRACK
- Erases individual tracks from the DN-400.
See Erase Track Menu for more details.
CONVERT DV TO AVI
- Converts .dv files only to .AVI files for greater
NLE compatibility. AVI files cannot be played back from the unit.
See Convert DV to AVI Menu for more details.
SET OUTPUT CHANNEL
- Allows the output channel of the DN-400 to
be switched to a different number if there is a conflict.
See Set Output
Channel Menu for more details.
HDD SURFACE SCAN -
Checks the HDD for errors / bad sectors.
Only used if your DN-400 is not performing correctly, or you install a
suspect HDD. A result.txt file is created in the root directory of the HDD
this file can then be viewed from a PC.
REC. 16:9 DV STREAM –
Allows the user to enable or disable 16:9
recording from a DV stream or DV input. If disabled then the track
recorded will default to 4:3 aspect when viewed with other devices.
SELECT 16:9 MODE –
Allows the user to choose between 16:9
Anamorphic and 16:9 Letterbox modes when recording tracks.
HDD MODE CABLE LEN.
The DN-400 unit has two types of cable mode that can be set when
connecting the DN-400 unit to either a PC or MAC.
LONG DISTANCE CABLE
- If your IEEE 1394 cable length
≦
20 M
SHORT DISTANCE CABLE
- If your IEEE 1394 cable length
≦
1.8 M
POWER ON DEFAULT –
Allows the user to choose the default
recording mode at power on. The user can choose between DV/HDV
Input or an Analogue Input (
Video Input
button is On at start up).
FIRMWARE VERSION
- Display the Firmware Version of the DN-400
for Mother Board (MB) and Front Panel (FP). Please register your unit
with your local Datavideo office for updates on new firmware.
