21
Operation
Switching on
Once all cables connected and in place, switch on the TV Monitor and select the
correct A/V channel and then turn on the power switch on the rear panel of
CP-100 PRO.
If it’s already on standby status then press the Power Button on the remote
control handset, The CP-100 PRO start up will appear a blue screen on TV.
Playing a disk
Press the Eject Button on the front of theCP-100 PRO or on the remote control
handset and the CD tray will slide open.
The CP-100 PRO will accept Audio CD, VCD, HQ-VCD, S-VCD, DVD-Photo or
CD
DVD
formats
Place the disk that you want to load onto the tray, printed side facing up.
Press the Eject Button and the CD tray will close. After a few seconds the
CP-100 PRO will begin playing the disc automatically.
Note: The CP-100 PRO will playback and repeat the first track until you
press the “Next” key on the remote control handset. To playback the next
track press the next key. To repeat the entire CD, Press the “repeat” key on
handset to “Repeat All” tracks.
To play a specific track, select the track number from the numeric keypad on the
remote control handset. Example
Press 02 then enter. The Number two represents track 2.
To skip forward to the next track
,
press the Next Button on the remote control
handset
To return to the previous track, press the Previous Button on the remote control
handset
If you wish to search through a track during playback you can press the F.F.
Button. There are several speeds available and each time the F.F. Button is
pressed a faster speed is selected.
To search back through a track, press the REW Button. There are several
speeds available and each time the REW Button is pressed a faster speed is
selected.
