background image

1

The Important Notice of 

Safety Instruction and Radio & TV Interference 

 

1.  Read all of these instructions and save them for later reference. 
2.  Follow all warnings and instructions marked on the products. 
3.  Unplug this product from the wall outlet before cleaning. Do not use liquid or 

aerosol cleaners. Use a damp cloth for cleaning. 

4.  Do not use this product near water. 
5.  Do not place this product on an unstable cart, stand or table. The product 

may fall, causing serious damage to the product. 

6.  Slots and openings on the cabinet and the back or bottom are provided for 

ventilation. To ensure reliable operation of the product and to protect it from 
overheating, do not block or cover these openings. The openings should 
never be blocked by placing the products on a bed, sofa, rug or other similar 
surface. This product should never be placed near or over a radiator or heat 
register. This product should not be placed in a built-in installation unless 
proper ventilation is provided. 

7.  This product should be operated from the type of power source indicated on 

the marking label of the AC adapter. If you are not sure of the type of power 
available, consult your dealer or local Power Company. 

8.  Do not allow anything to rest on the power cord. Do not locate this product 

where the cord will be walked on. 

9.  If an extension cord is used with this product, make sure that the total of the 

ampere ratings on the products plugged into the extension cord to not 
exceed the extension cord ampere rating. Also, make sure that the total of all 
products plugged into the wall outlet does not exceed 15 amperes. 

10.  Never push objects of any kind into this product through cabinet slots as they 

may touch dangerous voltage points or short out parts that could result in a 
risk of fire or electric shock. Never spill liquid of any kind on the product. 

11.  Except as explained elsewhere in this guide, don’t attempt to service this 

product yourself. Opening and removing those covers that are marked “Do 
Not Remove” may expose you to dangerous voltage points or other risks. 
Refer all servicing on those compartments to service personnel. 

12. Unplug this product from the wall outlet and refer servicing to qualified 

service personnel under the following conditions: 
A.  When the power cord or plug is damaged or frayed. 
B.  If liquid has been spilled into the product. 
C.  If the product has been exposed to rain or water. 
D.  If the product does not operate normally when the operating instructions 

are followed. Adjust only those controls that are covered by the 
operating instructions since improper adjustment of other controls may 
result in damage and will often require extensive work by a qualified 
technician to restore the product to normal operation. 

Содержание CP-100 PRO































Отзывы: