Datavideo CCU-200, Инструкция по эксплуатации

Страница: 8 / 28

- 7 -
3. Connections and Controls
Front Panel
Power Switch
Power ON/OFF the CCU-200 main unit.
Note: Make sure all cables are properly
connected before turning ON the power.
CB (all in one) Cable Connection
(CB-65 / 66*)
Transmits HDBaseT signal (video,
audio and control), power, look
back video, intercom signal and
tally between CCU-200 and AD-
3.
Note: See Chapter 5 for pinout information.
LED Indicators
The top row consists of power indicators for CB
connections. Turning ON the device power turns
ON the green LEDs.
Note: When the power is shorted or
overloaded, the green LEDs will go out and the
device must be rebooted.
The bottom row consists of HDBaseT connection
indicators. First connect the CB cables and AD-3,
then turning ON the power of CCU-200 and AD-3
turns ON the yellow LEDs.