Datavideo CCU-100, Инструкция по эксплуатации

Страница: 6 / 18

- 5 -
2. Example CCU-100 Studio System based on Datavideo Products
Communication between AD-2 (S/P/J) and CCU-100 is bidirectional. The signals in each direction are listed
below:
CCU-100 – to – AD-2 (S/P/J)
• MCU-100 (S/P/J) / MCU-200 (S/P/J)* Control Signals
• Look Back Signal
• Power for camera and look back monitor
• Intercom System Signal
• Tally Light signal from switcher
AD-2 (S/P/J) – to – CCU-100
•
Camera SDI Signal
•
ITC-100* Intercom System Signal
•
Camera View Finder Signal (composite video)
The View Finder Signals and the parameters are sent to the AD-2 (S/P/J), which in turn transmits to the
TLM-430 for viewing. To display various camera parameters on the TLM-430*, simply press the Shot
Mark button on the MCU-200 (S/P/J)*.