background image

 

- 3 - 

 

All mail or transportation costs including insurance are at the expense of the owner.  

 

All other claims of any nature are not covered. 

 

Cables & batteries are not covered under warranty. 

 

Warranty only valid within the country or region of purchase. 

 

Your statutory rights are not affected. 

 
Two Year Warranty 

 

All Datavideo products purchased after 01-Oct.-2008 qualify for a free one year extension to the 

standard Warranty, providing the product is registered with Datavideo within 30 days of purchase. For 

information on how to register please visit www.datavideo-tek.com or contact your local Datavideo 

office or authorized Distributors 

 

Certain parts with limited lifetime expectancy such as OLED Panels, DVD Drives, Hard Drives are only 

covered for the first 10,000 hours, or 1 year (whichever comes first). 

 

Any second year warranty claims must be made to your local Datavideo office or one of its authorized 

Distributors before the extended warranty expires. 

 

Disposal 

 

For EU Customers only - WEEE Marking 

This symbol on the product indicates that it will not be treated as household waste. It 

must be handed over to the applicable take back scheme for the recycling of Waste 

Electrical and Electronic Equipment. For more detailed information about the recycling of 

this product, please contact your local Datavideo office. 

 

 
 

 

Содержание CCU-100



















Отзывы: