Datavideo BB-1, Инструкция по эксплуатации

Страница: 18 / 24

18
6. Set the ‘Latency’ value to 1000, for more information on the SRT latency parameter please see the ‘SRT
Latency’ section of this manual.
7. Click the ‘Save’ button at the bottom of the page, the stream to dvCloud should start automatically.
8. Please see the dvCloud tutorial videos for more information on how to use dvCloud
https://www.datavideo.com/us/page/dvcloud-howto-vids
Decoders & Software players
Pull the SRT stream directly from the PTC-140
The PTC-140 has a built in SRT server listening on port 9000, to pull the SRT stream into any SRT capable software
player or decoder use the URL below replacing 10.34.1.1 with the remote IP of your PTC-140.
SRT://10.34.1.1:9000
Pull the SRT stream from dvCloud
dvCloud features a built in SRT server, you can connect multiple SRT capable decoders or software players without
any additional bandwidth at the camera side.
1. Connect the PTC-140 to dvCloud as detailed in the section above.
2. Click the ‘SRT’ button to the right of the channel on dvCloud, this will automatically copy the SRT URL for this
channel.
3. Paste the URL into the SRT capable software player or decoder of your choice.