background image

2

 

 

About this Manual

Thank you for purchasing Saturn Series Touch Terminal. This terminal offers highly enhanced 

features, with easy connection to various optional devices for optimal performance. This user 

manual describes how to setup and connect your terminal.

Copyright

© Copyright 2019
All rights reserved. This product and related documentation are protected by copyright and 

are distributed under licenses restricting their use, copying, and distribution. No part of this 

documentation may be reproduced in any form by any means without prior written authorization of 

the manufacturer and its licensors, if any.

Safety Information

Before you Proceed:

•  Read the safety notices and the User Manual carefully before using the product.
•  Keep the box and packaging in case the product needs to be shipped in the future.
•  Follow the product and warning label instructions.
•  Any changes or modifications that do not follow the instructions in this manual will void this 

product’s warranty.

Power Supply Safety Notes:

•  To avoid electric shocks, disconnect the power cord from the electrical outlet before 

relocating the system. 

•  Make sure the voltage of the power outlet conforms within voltage range of the terminal. 

Failure to comply may cause the electric shock or damage to the terminal. If you are not 

sure of the electricity voltage that you are using, consult your local electricity company.

•  To avoid fire or electric shocks, do not overload electric power outlets.
•  Protect the power cord from being walked on or pinched particularly at plug, convenience 

receptacles, and the point where they exit from the apparatus.

Operating Instructions

•  Keep this manual for future reference.
•  Keep this equipment from moisture and dust.
•  Place the equipment on a stable surface before setting it up.

Содержание S-615L


















































Отзывы: