PAGE14
PAGE15
TO ENABLE
TO DISABLE
Press button 1
Press button 2
EXIT PROGRAMMING
10.0 - PROGRAMMABLE FEATURES
With the alarm disarmed, lift the seat or
topcase.
Turn ignition key to ON.
The LED will light up for approx. 1 sec.
Acoustic signals
Panic siren
4
2
3
1
While the LED is ON
simultaneously
press the 2 buttons on the remote control.
A Beep and a Bop will confirm the system
is in programming mode.The LED will light
up steady.
After pressing both buttons simultaneously (step 4), program the features
according to your needs.
Button 1: TO ENABLE
Button 2: TO DISABLE
Button 1: TO ENABLE
Button 2: TO DISABLE
11.0 - PROGRAMMING EXAMPLE
!
!
!
!
!
!
With the alarm disarmed, l
opcase.
.
While the LED is ON, simultaneously press the 2 buttons on the remote
control. wo Beeps
system is in
mode.
The LED will turn ON steady
,
will confirm that
s
have
.
When the last feature is programmed, the system automatically exits the
programming mode. Three
followed by
will confirm the end of
the procedure. T status LED will also
OFF
exit
ignition
P
f
NB:
To help you understand the programming procedure, here below is an
example showing how to enable both features.
Keep in mind that, at every button press, the system automatically scrolls to the
next feature.
ift the seat or open the t
Turn ignition key to ON; the LED will light up for 1 sec
T
will confirm that the
programming
.
Press remote control button 1 a Beep
acoustic signal
been enabled
Press button 1 again, a Beep will confirm that the panic siren has been
enabled.
Bops
a Beep
he
turn
.
Turn ignition key OFF and close the topcase/seat.
You can
programming mode at any time by turning
key OFF.
rogrammed eatures will automatically be saved while the others will remain
unvaried.
!
To either enable or disable one of the programmable features proceed as
indicated hereafter.
NB: Remember to ALWAYS arm and disarm the alarm before programming.
