Datastrip EasyRead Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 41

Datastrip EasyRead Скачать руководство пользователя страница 23

4209-00009-000 EasyRead (DSV3-EP) User’s Manual

Rev 0E

6/29/2009

22

Copyright © 2009 by Datastrip, Inc. All rights reserved.

Reproduction in whole or in part is prohibited.

9

Regulatory Compliance Statement

The DSV3 products are in conformity with the requirements of the Low Voltage Directive (72/73/EEC)
and the EMC directive (89/336/EEC) as amended by (93/68/EEC).

FCC Declaration:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and the receiver

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

•

Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modification to Datastrip’s mobile terminal not expressly approved by the
party responsible for assuring compliance could void the user's authority to operate the equipment
in a safe or otherwise regulatory compliant manner.

EasyRead (DSV3-EP)

EasyVerify (DSV3-SP)

«
...
21
22
23
24
25
...
»

Содержание EasyRead










































Отзывы:

Нет отзывов