4209-00009-000 EasyRead (DSV3-EP) User’s Manual
Rev 0E
6/29/2009
20
Copyright © 2009 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
•
Hit the
File Selection
button to choose which file to download, or Cancel to abort.
•
Using the
File Dialog
box, find, and select the file you wish to download, then hit “
OK
”.
•
The application will then display the file name and path of the file that was selected, and prompts
the user to verify that it is the correct file to use. Select the button labeled “
Yes, Proceed with
update
” to begin the flash update process.
•
If the Embedded Controller was selected to be updated, a message is displayed noting that after
the update, the terminal will power-down. This is normal operation.
•
Upon completion of the flash update, a status message box appears indicating the success or
failure of the process. If a failure occurs, the reason for the failure is provided.
•
With all updates with the exception of the Embedded Controller, the user is then placed back to
the main screen of the app (4 update buttons). The user may then update another area, or exit the
application.
7.4
Loading Digital Still Camera Firmware Updates
The
DSC Firmware Update Utility
is a “stand-alone” program which can be used to update the firmware
in the DSC camera module. The procedure for updating the Digital Still Camera firmware is as follows:
•
In the directory
My Device\Hard Disk\DSV3
, run the utility
DSC_Firmware_update.exe
.
•
The application displays the current version number of the camera firmware and asks the question,
“
Do you want to update the camera firmware?
”
•
If you answer “
Yes
”, then browse to the directory
My Device\Hard Disk\DSV3\DSV3_DSC_Firmware
, select the latest firmware version, and
double-click on it, or select it and hit “
OK
”.
•
Wait for the camera to update its firmware. Note: After the firmware is updated, the camera
illumination LED will blink 10 times.
•
Reboot the terminal to activate the new firmware.
